Building a 3.5mm 5.1 Surround Sound Switch / Splitter Box
Saturday, August 9th, 2008I had a problem which needed solving.
I’ve just bought a Dell 2709w Monitor which takes DVI and has 5.1 output using the standard PC solution of three 3.5mm jacks, coloured Green, Orange and Black. I had hooked up my Xbox 360 via HDMI to the monitor, and the sound comes out of these (unfortunately only in Stereo since it’s in Dolby Digital, but that’s another story). This would be great, however there is no similar input, meaning that I have the issue that I had to keep swapping the jacks on my subwoofer if I wanted to get any sound from my PC or the Monitor. Having carried out much searching on the internet, I was unable to find a box that does this, and while many people seem to have similar problems, very few people have a solution.
My first test was to simply try a headphone splitter in reverse on each individual subwoofer channel. This didnt work, since the computer’s output always took presedence over the monitor’s output. It was then that I came across the following article on Bl3nd.com – 5.1 Audio Switch. It’s at this point that I decided to contact Joey Hazlett, the owner of the site to get some information and increase my knowledge on building such a device, with a mind to do it myself. I have to say that Joey was masses of help and the following guide wouldn’t be possible without him.
Joey’s guide was good, however in the UK I was struggling to find many of the parts. It was then I decided to use three switches to control each channed independently. So, here i a guide to building a box like I have now got…
